10-17 GPM
Tree Reaper Brush Cutter For Excavators
The CID Excavator Tree Reaper is designed for operators who need a tough, reliable brush cutter built for heavy land clearing. Its open-front design tackles dense brush and small trees, while a radial piston motor delivers maximum cutting power with fast recovery to keep you moving.
Cutting Configurations:
- Standard 2-Blade (TREX-S): Features a heavy-duty 2-blade holder with 5/8″ AR400 steel blades designed for general brush cutting.
- Upgraded 3-Blade & Mulching Teeth: Upgrade to a 3-blade holder equipped with 9 mulching teeth for added bite, finer processing, and faster clearing. (Must be configured when ordering).
- Note: Website photo shown with Upgraded 3rd Blade & Mulching Teeth Option.
The Tree Reaper is available in both low-flow (10–17 GPM) and high-flow (18–25 GPM) setups to match your machine. Low-flow models deliver top performance for smaller excavators, while high-flow options offer higher tip speeds and the power needed for wider cut widths. Serrated deck edges work with your excavator thumb to easily grab and control material, commercial Parker hoses provide dependable hydraulic performance, and built-in access holes make blade servicing simple.
Will This Fit My
Excavator?
Use dropdowns to check your excavator specs and find the right fit!
Aux Flow
Hydraulic Pressure
Swipe to compare models →
| 36" Low Flow Tree Reaper Brush Cutter | 44" Low Flow Tree Reaper Brush Cutter | 36" High Flow Tree Reaper Brush Cutter | |
|---|---|---|---|
| SKU | TREX1017-36 | TREX1825-44 | TREX1825-36 |
| Weight (Lbs.) | 432 | 488 | 440 |
| Working Width (") | 36 | 44 | 36 |
| Motor | Radial Piston Motor | Radial Piston Motor | Radial Piston Motor |
| Flow Range (GPM) | 10-17 | 18-25 | 18-25 |
| RPM | 841-1430 | 908-1261 | 908-1261 |
| Tip Speed (ft-min) | 7924-13471 | 10460-14528 | 8558-11886 |
| Tip Speed (MPH) | 90-153 | 119-165 MPH | 97-135 |
| Cutting Capacity (") | 4 | 5 | 4 |
| Hydraulics | Parker Hoses | Parker Hoses | Parker Hoses |
| Cutter Design | Open Front with Serrated Edges | Open Front with Serrated Edges | Open Front with Serrated Edges |
| Blade Material | 5/8" AR400 Blades | 5/8" AR400 Blades | 5/8" AR400 Blades |
| Number of blades | 2 (Standard) or 3 (Adds 78 lbs.) | 2 (Standard) or 3 (Adds 78 lbs.) | 2 (Standard) or 3 (Adds 78 lbs.) |
| Mulching Teeth | Available on 3 Blade Only (3 Teeth Per Blade) | Available on 3 Blade Only (3 Teeth Per Blade) | Available on 3 Blade Only (3 Teeth Per Blade) |
| Mounts Available | Kubota, Bobcat, John Deere, Takeuchi, Wain Roy, Case, CAT, Alternates Available | Kubota, Bobcat, John Deere, Takeuchi, Wain Roy, Case, CAT, Alternates Available | Kubota, Bobcat, John Deere, Takeuchi, Wain Roy, Case, CAT, Alternates Available |