14-20 GPM
Standard Duty Open Front Brush Cutter For Skid Steers
Tackle grass, brush, and small trees with an open-front cutter designed for better clearing and faster ground access. The Skid Steer Standard Duty Open Front Brush Cutter features a high torque Parker motor and a RC30–40 HP right-angle gearbox, delivering reliable power without requiring a case drain. The open front design with a 12″ push bar makes it easier to take down and feed material to the 2-blade cutting system mounted on a stump jumper blade holder.
Key Features:
- Cutting widths: 60″, 72″, 78″
- Cutting capacity: up to 3″ material
- Flow range options: 14–20 GPM or 16–26 GPM
- High torque Parker motor with RC30–40 HP right-angle gearbox
Swipe to compare models →
| 60" Standard Open Front Brush Cutter | 72" Standard Open Front Brush Cutter | 78" Standard Open Front Brush Cutter | |
|---|---|---|---|
| SKU | SDOFBC60 | SDOFBC72 | SDOFBC78 |
| Weight (Lbs.) | 878 | 1004 | 1104 |
| Cutting Width (") | 58 | 68 | 78 |
| Overall Height (") | 21 | 21 | 21 |
| Open Front Push Bar Height Above Deck (") | 12 | 12 | 12 |
| Cutting Capacity (") | 3 | 3 | 3 |
| Flow Range (GPM) | 14 - 20 GPM or 16 - 26 GPM | 14 - 20 GPM or 16 - 26 GPM | 14 - 20 GPM or 16 - 26 GPM |
| Motor | High Torque Parker Motor | High Torque Parker Motor | High Torque Parker Motor |
| Case Drain | Not Required | Not Required | Not Required |
| Gear Box | RC30 - 40 HP Right Angle | RC30 - 40 HP Right Angle | RC30 - 40 HP Right Angle |
| Blade Count | 2 | 2 | 2 |
| Deck Material | 3/16" | 3/16" | 3/16" |
| Side Material | 3/16" with 3/8" flatbar reinforcement | 3/16" with 3/8" flatbar reinforcement | 3/16" with 3/8" flatbar reinforcement |
| Blade Holder | Stump Jumper | Stump Jumper | Fabricated single plate |